Our Products

 We now accept payments by Credit Card, Paypal or Cheque

 

   MSB Soda Blasting Pot

To quote Classic and Sports Car magazine, " Few products have impressed the C&SC garage team as much as this handy soda blaster".

The blaster is fitted with our own metering valve specifically designed to flow soda correctly and in the exact proportion to allow smooth soda blasting of any surface at variable pressure. Comes complete with everything you need to load up with soda and start blasting, including full instructions and face hood. Requires a compressor supplying a minimum of 8cfm.
We strongly recommend the use of Armex Flow XL soda for smooth operation. We've tried em all!

£159.95    Carriage (Mainland UK) £8.00


  
 

    MSB Soda Blasting Conversion Kit

This kit contains everything you need to convert your generic sandblasting pot for use with soda. It contains a complete MSB soda metering valve assembly, PTFE tape and full instructions for fitment and operation. It will fit any sandblasting pot that looks a bit like ours. This includes the Clarke model and many others. They all come from the same factory in China.
We strongly recommend the use of Armex Flow XL soda simply bcause we know it works better than any other with our equipment.

£59.95         Carriage (Mainland UK) £6.00


Armex® FLow XL Blasting Soda

25 Kilos of Armex Flow Formula XL for use with the MSB Soda Blasting pot.
XL has a particle size of about 280
microns. This large particle is excellent for coatings removal and heavy cleaning applications.
In a workshop environment with no specialist moisture traps in use, normal blasting soda will prove problematical due to moisture in the air.
A cheap £30 moisture trap just will not remove enough moisture. We know... we've tried them all. FLow XL is the answer. The Flow XL contains the flow aid MoistureGuard™ 8 making the media 8 times more resistant to moisture than regular baking soda or other baking soda abrasives. These flow aids are very important in a blasting operation to ensure that the media is running continuously and consistently through the metering valve to the nozzle. Because the blast equipment runs on compressed air, clumping and clogging of media is a primary concern for blasting operations particularly when working in high humidity environments. While flow formulas can remain dry even in water, following blasting the moisture resistant barrier is broken and the waste media is fully water soluble.
In the long run, the small extra cost of Flow XL will be more than compensated by lack of wastage and down time.

£29.95    Carriage(Mainland UK) £10.00


MSB Hard Media 40Kg Blast Pot

Specifically designed to blast 'Archifine' hard media at low pressure, this pot is fitted with our own design of metering valve assembly to flow a fine, hard media at pressures as low as 15psi for soft surfaces and up to 50psi for really tough coating.
Perfect for removing coatings and rust from hard surfaces. It leaves a finely etched surface on metals,  perfectly keyed for painting.
Comes complete with everything you need to load up with Archifine and start blasting, including full instructions and face hood. Requires a compressor supplying a minimum of 8cfm.
We strongly recommend the use of Archifine because its very good and not dangerous, though any fine media will work.
This pot will also blast soda.
Be aware that if you use this pot for both media, there is a chance of contamination of hard media in the soda - a potential problem if blasting engine components. Why not buy both pots?

£179.95   Carriage (Mainland UK) £8.00


Archifine® Hard Media

25Kg bag of 'Archifine' hard media. This media is Aluminium Silicate of a fineness perfect for use with our new hard media blaster. At low pressure it will remove paint from aluminium without distorting the surface, rust from steel without harm, or clean soft, delicately carved stonework. At higher pressure it is as tough as any blast media, removing the most stubborn of coatings and leaving a fine, etched surface.

£17.00     Carriage (Mainland UK) £10.00


Compressor

Superb Little Home Workshop Compressor   

An excellent direct drive compressor. The smallest that can be used for blasting components etc.
and really useful for many other applications.
50ltr receiver, 8cfm output and 115psi maximum pressure.
2hp, 240v direct drive induction motor.

£120.00   Carriage (mainland UK) £17.00

 
Website by Michael Millar